A873 Tail stock adapter, 1 inch X 8TPI
This unit does not rotate
Allows for mounting a chuck on the tailstock to provide centering for vacuum mounting
Steps;
1/ Take the chuck off the headstock with the workpiece still in it.
2/ Mount the chuck/workpiece on the tailstock using this adapter.
3/ Setup your vacuum chuck system on the headstock.
4/ Move the workpiece connected to the tailstock up to the vacuum chuck (thus perfectly on the centre line).
5/ Apply vacuum and transfer the workpiece from the chuck to vacuum chuck.
Made in the USA
www.tmiproducts.net