Beal 1" x 8" Spindle Tap 

Nova Comet 1 and 2 Comet DR Tooline  Delta  Jet General 

Hole size required 7/8" x 1 3/4" deep 

These taps are machined in lathe spindle sizes so that after you have drilled a wood block, you can tap it and mount it directly on your lathe.

The tapped block can then be put to use in a special face plate, vacuum fixture or other mounting assembly.

Offered in Three  sizes — 1"-8, 1-1/4"-8, or 33 x 3.5 mm.

Beal Spindle Tap instructions