Woodcut TruGrind and Grinder Set Up Ready to Go 200mm

We fit the  Grinder to a base and supply all materials so your grinder is plug in and ready to use  $100 value 

Any configuration quoted 

We are constantly asked to supply wood turners with a full sharpening setup that is user friendly and can be used to sharpen the range of chisels they have in their woodturning kit.

To save you the time of installation we now offer a ready to go setup so you can just turn on the switch and start sharpening. All you have to do is clamp or screw to your bench and begin.

Option 1: $695.00

Comes with 200 mm grinder, white 120 grit wheel, Trugrind Sharpening Jig, fixed to base ready to turn on and use  

Option 2:  $725.00

Comes with 200 mm grinder, white 120 grit wheel, Trugrind Sharpening Jig, Timberly Spacer Set. Fixed to base ready to turn on and use.

Option 3: $775.00

Comes with grinder, white 120 grit wheel, Trugrind Sharpening Jig, Timberly Spacer Set, T-bar Diamond Wheel Dresser, Tri-Angle Gauge.

Fixed to base ready to turn on and use.

Option 4: $825.00(Picture to come)

Grinder set up with CBN Wheel (200 x 25.5 x 180 grit) and Trugrind Sharpening Jig on the left or right.

Grey wheel on opposite side 

Fixed to base ready to turn on and use.

Option 5A: $889.00 

Grinder setup with CBN wheel, (200 x 25.5 x 180 grit) white wheel and TruGrind Sharpening Jig,

 Timberly Spacer set 

Fixed to base ready to turn on and use . 

Additional Base  Slide  $114.00

Option 5B: $1015.00

Grinder setup with CBN Wheel 8" x 1.1/2" x 1.1/4" bore x 180g with bush to suit shaft - 5/8" 

and TruGrind Sharpening Jig, Fixed to base ready to turn on and use . 

+Accessories : white wheel $88.00

+Extra base slide on opposite side to Cbn $114.00

+Spacers $35 

Option 6: $284.00 

 Tooline Standalone grinder with grey wheels.  No extras  

Product descriptions 

Above are a few options but you can order any configuration 

 Starting With Grinder on its own then Add White Wheels , Add CBN wheels, Add additional base Slides ,Add Left or Right Sturdy rests ,Add Spacer set T-bar wheel Dresser Ti Gauge .No charge for us to make up and fit together.  

• ·        
• ·         Timberly Spacer Set: 30, 35, 45- and 55-degree jigs 
• ·         Trugrind sharpening system: base slide and tool holder
• ·         Tri Gauge checks the angles of your grind
• ·         T-Bar Diamond Wheel dresser
• ·         Instruction sheet  
• ·         200mm Tooline 550W 2850RPM bench grinder
• ·         200mm x 25mm 120 grit aluminum oxide wheel (essential for HSS)
• ·         CBN Wheels also available in 200 x 40mm x 180grit in 5/8 or ½”
• ·         Note Freight Listed is an estimate only please email for a quote