Replacement Teknatool Nova 3000 /1624 Drive Belt OUT OF STOCK 

We suggest if you have chewed out your drive belt to check the alignment of the drive pulley and shaft pulley.

By using a long reach Allen key undo the key on the keyway and move the stepped pulley so they align.

A straight edge like a steel rule from pulley to pulley will soon show you if they are out.

Check that none of the fins are bent or broken.

Reinsert the Allen key with some PVA glue this will prevent the key from coming lose yet enable you to take out if needed.

Don't over tighten.