Teknatool Insert compatible faceplate.

We are Continually asked for a face plate to fit a lathe that has a non standard thread problem now solved  I had Teknatool make a face plate that will take all the inserts in the Nova range. This is the same insert that fits your chuck.

Note it is recommended that each chuck and now face plate has its own insert leaving an insert on the lathe can cause run out due to the fact that the female thread is a machine thread not a working thread.    
A 150mm faceplate with 12 mounting holes.

This faceplate is configured to use a Nova Insert giving a wide range of compatible threads. It does not fit to a lathe without firstly installing an insert. Inserts Plus $35 

List of Inserts here Teknatool Lathe To Chuck Inserts

Has 2 grub screws to secure the insert to the faceplate.

NOVA Insert Thread Table
Code
Thread Size Lathe Match (where known)

I9NS 3/4 x 16Tpi UHF RH   Older Record Cmc Delta  

I2NS  M20x2RH Tyme Cub
I3NS M20x1.5RH Electra Beckum / Multico Sumaro
I6NS 3/4” Plain Bore
I7NS 1 1/8” 8TPI UNC RH Oliver
I8NS 7/8” 12TPI UN LH
I9NS 3/4” 16TPI UNF RH
IANS 3/4” 14TPI RH Teknatool TL1000 (Pre 1986)
IBNS 3/4” 14TPI LH Teknatool TL1000 (Pre 1986)
ICNS 1” 10TPI RH Teknatool TL1000, Woodfast, Durden
IDNS 1” 8TPI RH Delta, Rockwell, Golding, General, Teknatool Comet (North America) & Mercury Lathes
IENS 1” 12TPI RH Myford ML8, Turnstyler
IHNS 3/4” 10TPI UNC Rockwell / Homecraft
IINS M24X3 RH B Line, Arundel K600/K450
IJNS 1 1/8” 12TPI RH Myford Mystro, Masterlathe (NZ)
IKNS M18X2.5 RH Elu DB 180
ILNS 1 1/4” 8TPI UNS RH Designed for Teknatool 1 ¼” thread reversible operation lathes
IMNS 1” 10TPI LH Teknatool TL1000, Woodfast / Durden
INNS Blank insert. Can be threaded up to 28mm (1 1/8”) Once threaded, this blank adapator cannot be re-threaded.
IONS 1 1/8” 7TPI RH Morton
IQNS M30X3.5 RH Teknatool TL1500/3000/Comet (European & Southern Hemisphere), Woodfast
ISNS Shopsmith 5/8” Plain Bore Designed Specifically for Shopsmith Pro V, Power Pro Machines.
ITNS 1” 8TPI RH&LH Dual Threaded
IUNS 1 1/8” 12TPI UNF RH Taiwanese
IVNS 7/8” 14TPI RH
IWNS M25X2 RH For lathes don't have reverse turning ability.
IYNS 1 1/4” 8TPI UNS RH Tyme Avon ('83 on) & Classic, Tanner SD165; Selbix Springwood; Sorby (some markets); Cotech

IXNS 1"8 Dual threaded LH/RH reversible Designed specifically for the NOVA Comet II Midi Lathe, features lock for the reverse function.