Loading... Please wait...

Categories

Our Newsletter


Hunter #5 Tapered Straight and Swan Neck Un-Handled

  • Image 1
  • Image 2
Price:
$154.00
Weight:
1.00 KGS
Shipping:
$8.00 (Fixed shipping cost)
Style /type:
Quantity:
Bookmark and Share


Product Description

Hunter #5 Tapered Straight and Swan Neck Tools

 Comes fitted with 1 x Carbide  Cutter #5 10mm

#5 5/8 16mm  Tapered Straight Tool Un-Handled  $180.00

#5 5/8  16mm Tapered Swan Neck  Un-Handled  $190.00

Think of the Hunter as a finishing tool.  The Hunter Tool is capable of hollowing an object completely, but most turners rough hollow with conventional tooling. Hunter Tools are mainly used for the final form, shaping, and finish cuts.

Hunter Tools are best used at higher RPM (1800-2200 RPM) to have sufficient surface speed. With fine tool control you can peel off shavings that are onion skin thin. The surface will be so smooth that little sanding will be needed. Of course as with any other cutting tool you will be cutting with the grain for the smoothest cut. So for the underside of box rims, cut from the rim to the major diameter of the body of the box. Once you reach that diameter, lift the tool and cut from the bottom upward to the major diameter of the body of the box. It is mesmerizing to peel of these ultra-fine shavings so be careful, or you may make the inside merge with the outside….

There is a learning curve with the Hunter Tools. You have to learn to rotate the tool clockwise into the cut with the tool slightly above center and angled downward somewhat like a scraper. The tool does not scrape; it cuts like nothing you have ever seen.  Don’t expect to hog out the interior of a box or something similar quickly. The tool is not designed for that- it is a final form and finish cut tool.

These Hunter Swan Necks are real problem solvers. With practice, you will have very little sanding to do. By the way, the harder and more dense the wood the better the Hunter tool seems to like it.

Over seas post quoted before shipment 


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the Hunter #5 Tapered Straight and Swan Neck Un-Handled to your wish list.

You Recently Viewed...