7.112 Gemstop FCII is a solvent free 2 part, medium fast cure epoxy adhesive. It is formulated for gluing wood, metal, concrete, fibreglass and similar substrates. It is usually tack free and can be handled after 1-4 hours depending on temperature. It will cure at low temperatures and is tolerant of damp and less than perfect surfaces. It can be cut with thinners and used as sealer for wood – consult GemCo Ltd.

Ideal for gluing two different materials Ie: small components like Paua. Coins ferrous metals to timber 

It has been used by hobbyists, crafts, wood turners, boat builders, flooring contractors etc.

Download 7.111 GEMSTICK FC I Product Sheet

Physical properties

• Appearance: Part A(Base) clear gel; Part B(Hardener) - clear gel
• Odour: low
• Solids: 100%
• Coating Type: Epoxy
• Packaging: Two part pack – 500ml, 2 & 8 litre kits
• Mix ratio: 1:1
• Pot Life: 10 - 15 min at 20 degrees Celsius (100 gram mix)
• Coverage: 5 square metre/litre @ 200 mic DFT(theoretical - depends on substrate)
• Cure to handle: Typically 1-4 hours - will vary according to temperature & amount mixed
• Complete cure: Typically 24 hours

Surface Preparation

• All oil, grease , loose material ,and other contaminants must be removed.

Method of Application

• Add 1 part hardener & 1 part base together and thoroughly mix with a square bladed putty knife on a board.
• GEMSTICK FC I is applied by putty knife or similar.
• Cure to handle is normally 1-4 hours.
• Will vary depending on temperature and amount mixed.
• GEMSTICK FC I can be over coated with most adhesives, or coatings providing it is thoroughly sanded.

Handling Precautions

• Avoid contact with eyes and skin.
• Do not ingest.
• Use with adequate ventilation.
• Protective clothing ,eye protection, and gloves should be worn.
• Do not breathe vapour or spray.
• Keep away from children.