Teknatool Chuck Insert Adaptors

See below for a insert thread list or refer to Teknatool's web site for thread sizes 

Please email timberly@xtra.co.nz if you have any questions then we will order in for your requirements.

www.teknatool.com/products/Lathe_Accessories/adaptor_page.htm for adaptor size.

Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks

The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks.  Once the insert is in place, you can then put your chuck onto your lathe. 

Features & Benefits:

• Adapts any NOVA chuck to almost any lathe spindle at low cost.
• The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.
  
  

HOW DOES THE INSERT SYSTEM WORK? 

 The insert fits into the back of the chuck and onto your lathe headstock spindle. We have the largest range of inserts to fit many different popular lathe models. The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes, which one you need will depend on what lathe you have. See the insert thread listing below for more details. If you are not sure what lathe thread you have, see our Teknatools  FAQ on how you can identify this threadIn order to help you find the most suitable adaptor, we provide the following table for you.The first refers to the list of insert/adaptors that we manufacture.  Check with us if your lathe is not listed, we update our inserts all the time.   The second table refers to the thread sizes which we direct thread into the chuck body - as such, these do not require insert/adaptors.  A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded, so it pays to be sure that your lathe thread size is not covered by the insert/adaptors first!   

OPTIONAL ACCESSORIES

Insert Spanner. Makes it easy to get inserts off and onto your chuck and lathe. Dual ended, sizes useful for other applications on Nova lathes.

When purchasing a chuck there will be no charge on the insert for post.
Overseas post by quotation.

NOVA Insert Thread Table
Code
Thread Size Lathe Match (where known)
I2NS  M20x2RH Tyme Cub
I3NS M20x1.5RH Electra Beckum / Multico Sumaro
I6NS 3/4” Plain Bore
I7NS 1 1/8” 8TPI UNC RH Oliver
I8NS 7/8” 12TPI UN LH
I9NS 3/4” 16TPI UNF RH
IANS 3/4” 14TPI RH Teknatool TL1000 (Pre 1986)
IBNS 3/4” 14TPI LH Teknatool TL1000 (Pre 1986)
ICNS 1” 10TPI RH Teknatool TL1000, Woodfast, Durden  
IDNS 1” 8TPI RH Delta, Rockwell, Golding, General, Teknatool Comet (North America) & Mercury Lathes
IENS 1” 12TPI RH Myford ML8, Turnstyler
IHNS 3/4” 10TPI UNC Rockwell / Homecraft
IINS M24X3 RH B Line, Arundel K600/K450
IJNS 1 1/8” 12TPI RH Myford Mystro, Masterlathe (NZ)
IKNS M18X2.5 RH Elu DB 180
ILNS 1 1/4” 8TPI UNS RH Designed for Teknatool 1 ¼” thread reversible operation lathes
IMNS 1” 10TPI LH Teknatool TL1000, Woodfast / Durden
INNS Blank insert. Can be threaded up to 28mm (1 1/8”) Once threaded, this blank adapator cannot be re-threaded.
IONS 1 1/8” 7TPI RH Morton
IQNS M30X3.5 RH Teknatool TL1500/3000/Comet (European & Southern Hemisphere), Woodfast
ISNS Shopsmith 5/8” Plain Bore Designed Specifically for Shopsmith Pro V, Power Pro Machines.
ITNS 1” 8TPI RH&LH Dual Threaded
IUNS 1 1/8” 12TPI UNF RH Taiwanese
IVNS 7/8” 14TPI RH  No longer available Discontinued 
IWNS M25X2 RH For lathes don't have reverse turning ability.
IYNS 1 1/4” 8TPI UNS RH Tyme Avon ('83 on) & Classic, Tanner SD165; Selbix Springwood; Sorby (some markets); Cotech IXNS 1"8 Dual threaded LH/RH reversible Designed specifically for the NOVA Comet II Midi Lathe, features lock for the reverse function.

Note Freight listed is for New ZEALAND Only  Email for a quote if over seas