Loading... Please wait...


Our Newsletter

Sierra Click Pen Kit. Gold plating+Black Chrome. TW-BPCL40

  • Image 1
0.03 KGS
$4.80 (Fixed shipping cost)
Bookmark and Share

Product Description

 Sierra Click Pen Kit. Gold plating+Black Chrome. TW-BPCL40

Sierra Click Pen Kits Assembly Instructions
7mm pen mandrel
2-pc bushing set TW-BP40#-BU
27/64” drill bit TW-DB27/64
Barrel trimming sleeve
Universal trimming kit
2-part epoxy glue or instant-cure glue(cyanoacrylate)
Preparing the Material Blanks
1. Only 1 material blank is required for this pen. Cut the material blank slightly longer than the
brass tube.
2. Drill the blank through the center with a 27/64” drill bit.
3. Glue the tube in the blank , spread the glue over the tube; insert the tube into the blank with a
twisting motion to spread the glue evenly inside. Center the tube lengthwise inside the blank.
4. When the glue dries,square the ends of the blank using a 7mm barell trimmer with the adapter
sleeve . Mount the sleeve over the shank. Trim the blank down flush with the brass tube.
 Mount 7mm spacer bushing in the mandrel . Slide the bushing,wide end in first. Insert the
blank. Follow with the other bushing, narrow end in first. Mount spacer bushing to fill the
space to the threads on the mandrel . Screw on the lock nut hand tight. Do not over tighten the
lock nut, it may damage the mandrel.
 Turn the blank down,close to the bushings. Follow with abrasives until the barrel diameters
are flush with the bushings .
 Apply the finish of your choice and polish.
 Remove the blank from the mandrel. 
Click mechanism assembly
3 steps  
Diagram B
 NOTE: Line up finished parts according to diagram B
 Push the click mechanism(end A) into the chrome end of the top cap put a drop of glue to
hold the click housing in place.
 Press this finial clip assembly into the barrel
 Affix the refill spring over the refill tip. Insert the refill(black end first) into the barrel 
 Thread on the tip assembly over the refill
 Drop the mechanism spring into the opening at the top cap
 Insert the click button and screw tight
 The pen operates by clicking on the button to extract or retract the refill


Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Sierra Click Pen Kit. Gold plating+Black Chrome. TW-BPCL40 to your wish list.

You Recently Viewed...