Loading... Please wait...


Our Newsletter

Plano OrbiCut Shaper Carver New Zealand Sales

  • 40mm
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
0.01 KGS
$4.80 (Fixed shipping cost)
Bookmark and Share

Product Description

Note Price for post listed is for New Zealand Only email for a quote to other countries

Available in the following options

1:Orbicut 20mm with Fine cut blades $100.00

2:Orbicut 40mm with Fine cut Blades $136.00

3:Orbicut 20mm  Replacement Fine Blades  $32.00

4:Orbicut 40mm Replacement Course  Blades $36.00

5:OrbiCut 20mm with both Fine and Course Blades  $132.00

6:OrbiCut 40mm with both fine and Course Blades  $172.00

Note : do not come with Course blades as a set they are an accessory


OrbiCut is a low speed cutting tool that smoothly and pleasantly hollows primarily concave surfaces, but can also be used to shape all kinds of surfaces in wood and other porous materials. The idea behind the tool comes from planing wood. The sharp, replaceable blades produce small shavings instead of scraping dust as high speed routing tools do. OrbiCut’s form and construction signifies that it is an extremely safe tool provided it is used with the correct speed (max 5000 rpm)

The OrbiCut cutter blades are made from HSS steel and are available in two versions. The tool is delivered with finely honed cutters, fine*, which protrudes just 0.1 mm from the body of the tool and are screwed in a fixed position. Extra cutters, coarse**, are available as an accessory. The blades can be sharpened with our credit card-sized 1200 grit diamond sharpener. Sharpen the broad flat side of the cutter by rubbing it gently to and fro. Intensive sharpening reduces cutting intensity, but makes the OrbiCut work more softly and pleasantly. 

 Try to cut with and not against the grain. While using it, vary the cutting angle of the OrbiCut gently until you find an angle at which the tool works smoothly and pleasantly, so minimising vibrations. One important safety detail is the OrbiCut flat top, which prevents the tool being used as a drill. If you push OrbiCut straight into the material, it will cut 2-3 mm into the material before you need to angle it from side to side to continue cutting farther.

 Both OrbiCut 20 and 40 can be used in an ordinary hand drill! The OrbiCut works best at speeds between 2500 – 3500 rpm. The maximum speed is 5000 rpm. The OrbiCut 40 has a shaft diameter of 11 mm so it cannot be used on high revolution angle grinders or on a weak flexible shaft. The Orbicut 20 has a shaft diameter of 6 mm

Can be used on the  Guinevere Flexible Shaft 11310












































Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Plano OrbiCut Shaper Carver New Zealand Sales to your wish list.

You Recently Viewed...