Loading... Please wait...


Our Newsletter

Nova DVR 3000

  • Image 1
  • Image 2
  • Image 3
  • Image 4
75.00 KGS
$50.00 (Fixed shipping cost)
Bookmark and Share

Product Description

One by Dvr 3000 with Faceplate live and drive centres no stand or legs

Recently Traded has had a board upgrade

Unlike motors on conventionally designed lathes, the motor on the DVR 3000 is built around the headstock spindle. Effectively, then, the shaft of the motor and the spindle are one and the same. That means the DVR 3000 is free of belts and pulleys. As a result, the lathe runs pleasantly smooth, whether you’re turning a large bowl at a slow speed or a thin spindle at a high speed. A cast-iron bed also helps keep vibration under control.


The motor, rated at 1 3/4 hp, runs on standard 240-volt current. Speed ranges from 250 rpm to 3,500 rpm, in 10-rpm increments. A broad range like that often spells low torque at the lowest speeds, but the DVR 3000 claimed full torque at all speeds. I detected a small amount of power loss at the lowest speed, but for the most part the motor provided more than enough power.

A display panel built into the headstock proved convenient. The LCD panel includes an on-off switch, speed change, forward-reverse, and controls to program the ramp-up speed (rate of start) as well as the starting speeds.

Like earlier Novas, the headstock on this version swivels. So by adding an optional outrigger unit, the bowl-turning capacity can be increased from 16 in. over the bed to 29 in. outboard.

The spindle has 1-1/4-in. by 8-tpi threads with a #2 Morse taper, the same size used on larger machines. Surprisingly, the lathe does not come with a handwheel, which often is standard on lathes, even on many midi-lathes. A 6-in. aluminum faceplate is standard and should be adequate for most work. The headstock also has an indexing pin with 24 divisions, which is useful for reeding and fluting.


Bowl Turning Capacity
380mm /16inch onboard
740mm/29inc outboard. (Using optional outrigger accessory)
Between Centers
Standard 600mm/24inch
(Extendable to as long as you want in 510mm/20inch increments, using optional bed extension accessory, TK-55195)
Power Output
HP (220-240 V), 10 amp plug
Speed Range
100 – 3000 continuous variable speed
Spindle Thread
1 1/4inch 8TPI RH
2MT Hollow
Swivel Head
360-degree swivel and lock at any position, plus detent locating positions at 0, 22, 4 and 90 degree
High accuracy and easy swivel

24 Division

Freight listed is an estimate only please email for a quote






















Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Nova DVR 3000 to your wish list.

You Recently Viewed...