Loading... Please wait...


Our Newsletter

Large Teardrop Cutter

  • Image 1
  • Image 2
  • Image 3
  • Image 4
1.00 KGS
$4.80 (Fixed shipping cost)
Bookmark and Share

Product Description

RS213C Large Teardrop Cutter
Large Teardrop is a standard cutter for RS213 Articulated Probe and can also be fitted to the RS200KT Multi tip.

For those who like to design and make special hollowing tools, the bits are drilled to take M5 screws. 


We find that the flat cutters are best ground at 10° to 15° to give the best cut.For shear scraping, the burr created is a vital edge and can be restored by rubbing the edge firmly with a Crown Burnisher or similar hard steel.After doing this three or four times is best to take the tool back to the grinder to restore the clean burr.Cutters 6 and 7 are used for hollowing or detail work and are best held in the Cutter Holder and sharpened to 10° to 15°. 

Sharpening is best achieved on a Woodcut stem Sharpener 

Use with Robert Sorby :Kelton:Woodcut Proform:Rolly Munroe and you will find it easy to remove all thise tool ridges inside a Vas eor Hollow form 

Sharpen as you would a skew from both sides and you will never have a dig in. See pictures 

  Made from HSS 3mm thick 35mm x 45mm in profile 

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Large Teardrop Cutter to your wish list.

You Recently Viewed...