WoodCut Little Wonder Cup Tool UN- Handled with Carbide Cutter

 "Supplied with Shaft and carbide  cutter (with 1 Torx key).

Many turners are now asking for Carbide cutters as they are using tools on very hard timbers like Australian burl.

Fact: Carbide cannot be sharpened as sharp as HSS but stays sharp many times longer.

The Little Wonder Tool is an easy to use wood turning tool designed to cut small end grain goblets, bowls, boxes and vases cutting,

Used on End grain from the centre out.

Used on Side grain from the rim to the centre.

This product cuts on its side with the bevel rubbing, slicing cleanly around the bottom curve of bowls.  NOTE not a scraper You will find a scribed line on the shaft which kept pointing upwards will assist in achieving the best results.

 Used in the same fashion as a bowl gouge with the bevel rubbing It is an ideal finishing tool to do the final finishing cuts on bowls, especially

 In addition, with some practice this can be used for detailing, making beads and coves, hollowing etc. These tools will just about do anything a wood turner needs to do.

 The Little Wonder gives an excellent finish and is most effective with curly or burred grain. 

 Available with M2 High Speed Steel and Carbide Cutters, handled or un handled.

Over seas freight Quoted amount listed for Nz Only 

  Online user guide and demonstrations available on You tube

.