Guinevere sanding Round Sleeves to fit 11341 round sander
11346 3 x Extra-Fine Round Sander Sleeves - 320 GRIT $28.80
11345 3 x Fine Round Sander Sleeves - 220 GRIT $28.80
11344 3 x Medium Round Sander Sleeves - 120 GRIT $34.80
11343 3 x Coarse Round Sander Sleeves - 60 GRIT $28.80
11342 4 x Assorted Round Sanders Include 1 each, Coarse, Medium, Fine, Extra-Fine $32.80
11341 1 x Guinevere Inflatable Round Sander $87.50
The Guinevere Inflatable Sanders are pumped up through an air inlet in the drive shaft located in the bottom of each sander. The air valve design leaves the bottom flat without a clumsy protruding valve on the sanders. This patented solution made it possible to make superior cylindrical drum sanders as well as a unique rounded sander with a Round shape at the business end. This molded rubber bulb constantly flexes and changes shape, making the sanders soft all the way to the edge.
With the choice of four (4) grits from coarse to extra fine, Guinevere eliminates scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. The sander actually becomes flat when pressed against a flat surface and round when pressed against a round surface i.e. the sanders conform to the underlying surface. Consequently the sanders should be filled with very little air (the round sander, 11341, needs to be pumped slightly harder than the drum sander).
ROUND SANDER 2”L X 2” dia (50 x 50mm)
Every sanding sleeve is made to specifically fit each inflatable sander.
The sanding cloth material is highly flexible and made of the very best quality, sanding not only wood but also metals, plastic, bone and horn.
On the round sander, the overlapping design of the sanding sleeves is to ensure longevity and optimum effectiveness in awkward places. As the sanders are both round and soft the tendency for them to be clogged by dust and resin is very small compared, for example, with rotating paper discs.
The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve.
Cleaning sticks are available separately.