Bee Kind - Finisher's Formula for Antiques, Woodturning and Craftworks
NOW IN A BRAND NEW 250G & 500G TIN! SAME GREAT FORMULA, BETTER PACKAGING. MORE WAX.
Using pure certified essential Manuka Oil - NO artificial fragrances. This is a perfect choice for restoring antique dining tables, restoring wood, or for use on
antique kitchen surfaces in older homes without using any nasty chemicals
Enhance the quality finish on your wood-turnings, antiques, and craft-works. A wonderful, durable combination of NZ Beeswax and high-grade Carnauba wax
that brings out the natural grain and beauty of wood. The advantages of using this wax are that it is entirely food safe and can be used safely over other finishes.
Application: Apply a thin coat of wax to the timber with a cotton cloth, let sit for ten minutes so the oils can penetrate the surface then either with a rotating
cotton buff/mop or a simple soft cotton cloth, buff to a warm luster. Will last for a long time, with a lingering scent of beeswax and essential certified plant oils
of orange & lemon, Manuka & Tea Tree
For Wood-turning on the lathe: Apply on the lathe at a suggested speed of 800rpm. With a lint free cloth apply firm pressure until an even shine appears.
There are no neurotoxic petroleum by-products, no solvents, turps and no artificial fragrances in our homemade special recipes. Every ingredient is renewable,
100% biodegradable, non-flammable and earth-friendly. Create a healthier home and use a product that is safe for your family, your health, and the
environment.
Finisher’s Formula is different from commercial furniture polishes because most sprays have a petroleum distillate base and have the tendency to evaporate quickly. Sprays such as pledge contain chemical silicones, which will eventually destroy the antique finish on your wood or produce spots over a period of time.
Our recommended application is to apply a thin coat of wax to the timber with a cotton cloth, let sit for ten minutes so the oils can penetrate the surface then either with a rotating cotton buff/mop or a simple soft cotton cloth, buff to a warm lustre.
For Woodturning on the lathe: Apply on the lathe at a suggested speed of 800rpm. With a lint free cloth apply firm pressure until an even shine appears.